1.Influence Mechanism of Resin Penetration on Molding Accuracy of Sand 3D Printing

LI Zheng1 , SHAN Zhongde2 , SUN Qili1 , ZHANG Xueliang1 , YU Luosheng1

[Abstract]    [View Full-Text]

2.Deformation Characteristics of Inclusions in Powder Metallurgy Superalloy and Effects on Flaw Detection Signals

ZHOU Xiaoming, WANG Zhibiao, WANG Chaoyuan, QUAN Peng, ZENG Weihu, FENG Yefei

[Abstract]    [View Full-Text]

3.Study on Selective Laser Melting Process and Mechanical Property of CX Alloy Steel

LYU Guangming, LI Yufa, GUO Shaoshuai, WANG Chen, TANG Hongkui, LAI Yunjin, WANG Qingxiang, LIANG Sh

[Abstract]    [View Full-Text]

4.Study on Microstructure and Properties of Austempered Ductile Iron Containing Cr

GUO Junbao1 , DONG Shengquan2 , KONG Bing1

[Abstract]    [View Full-Text]

5.Research on Post-treatment Process of Selected Laser Sintering Coated Sand

ZHAO Jinlong, ZUO Wei, QU Baofu

[Abstract]    [View Full-Text]

6.Preparation and Properties Characterization of W16Ti20Ta20V44 High Entropy Alloy

YU Xinshan, HUANG He, HUANG Huogen, ZHANG Jiajia, CHEN Xianglin, ZOU Dongli, LANG Dingmu, XU Haiyan

[Abstract]    [View Full-Text]

7.Microstructure and Properties of Novel Mg-4Li-xCa Alloy

ZHANG Kaiwang1 , ZHANG Qiang1 , SHI Xintai1 , CHAI Donglang2 , YAN Jinru1

[Abstract]    [View Full-Text]

8.Development and Application Effect of Coated Sand for Shell Mold Cast Steel

XIONG jie1 , HAN Yue1 , WU Changsong1 , YAO Wuli2 , CAI Ying2 , GU Xiaogang2 , WU Jianyun3

[Abstract]    [View Full-Text]

9.Cause and Control of Poor Fusion of High N-Cr Centrifugal Compound Rolls of 480×900

YANG Zhiqiang1 , LYU Weiwei1 , SU Chen1 , GUO Hongxing2

[Abstract]    [View Full-Text]

10.Analysis on the Characteristics of “Molding Elements” of New Environment-Friendly Modeling Molding Material

WANG Wenzhong1 , LI Qingsong2 , WANG Yidong2

[Abstract]    [View Full-Text]

11.Development of a New Type of High Strength Bimetal Brake Drum

XIE Yuan1 , LU Senjia2 , ZHANG Hongyan3

[Abstract]    [View Full-Text]

12.Defect Analysis and Process Optimization of the Gas Blowhole in Cylinder Head Castings

FU Lina, XIE Jikun

[Abstract]    [View Full-Text]

13.Semi Continuous Preparation of Rapidly Solidified Al-Ti-B Powder

QI Minjie

[Abstract]    [View Full-Text]

14.Study on Inclusion and Shrink Hole Elimination of EPC Ductile Iron Reducer Housing

ZHOU Rui1 , ZHANG Weijiang1 , LIU Wangqiang1 , LIU Gaofeng1 , DAN Yao1 , ZHAO Fangfang2

[Abstract]    [View Full-Text]

15.Effect of Low Temperature Treatment on Microstructure and Properties of C17510 Beryllium Copper Alloy

LU Hanlin, CHEN Leping, FANG Senpeng, ZHOU Quan

[Abstract]    [View Full-Text]

16.Brief Analysis of Electrical Installation, Testing and Commissioning of Sand 3D Printing Equipment

REN Guangning, WANG Zhigang

[Abstract]    [View Full-Text]

17.Effect of Heavy Strain Rolling and Homogenization on Mechanical and Damping Properties of Mg-4Sn-1Mn Alloy

ZHANG Hao1 , FENG Xuhui2 , SUN Youping2 , WAN Siyu2 , FENG Xuhuang3

[Abstract]    [View Full-Text]

18.Measures to Reduce Sticking Phenomenon in 1900 mm Slab Continuous Casting

ZHANG Minghai, ZHAO Jianping, WANG Shuai, TANG Guangpeng, LIU Xin

[Abstract]    [View Full-Text]

19.Research Status and Progress of Forming Technology and Failure Analysis of Automobile Brake Drum

LEI Yu1 , ZHANG Zhongming1 , WANG Jiahe1 , HU Bo2 , XU Chunjie1

[Abstract]    [View Full-Text]

20.Application and Practice of Case Method in Classroom Teaching of Materials Forming for Professional Master’s Degree

WANG Kai, HE Naijun, ZHOU Huailei, XUE Hansong, YOU Guoqiang

[Abstract]    [View Full-Text]