1.Research Progress on Microstructure and Properties of 304 Stainless SteelManufactured by Laser Melting Deposition

CUI Weiming1, ZENG Yuzhou1, BAI Qiheng1, WANG Chenxinwei1, LI Xu1,PAN Chengbo1, WANG Jiandong1, ZHAO

[Abstract]    [View Full-Text]

2.Recent Advances in the Three-dimensional Characterization ofMartensite/Bainite Hierarchical Microstructures

FANG Yu1, LIU Feilong1, SHEN Ximei1, WANG Lei2, SONG Shaojie1, LIU Feng1

[Abstract]    [View Full-Text]

3.Solidification Microstructure and Properties of Low-temperatureSn-xBi-1Ag Solder Alloys

HU Xiaojuan1, ZENG Guang1, LIAO Jieli1, FAN Jiangkun2

[Abstract]    [View Full-Text]

4.Influence of Different Heat Exposure Temperatures on the Oxidation,Microstructure, and Room-temperature Tensile Properties ofTi-22Al-25Nb Alloy

ZHAO Xiaobin1, JIA Runchen1, TAN Haibing2, ZENG Weidong1

[Abstract]    [View Full-Text]

5.Influence of the MEA Content on the Microstructure and Mechanical Properties of Ti-MEA Alloy Fabricated by Laser Additive Manufacturing

HE Qiuju1, CHENG Yao1,2, HUANG Xinde1, LUO Xuan1

[Abstract]    [View Full-Text]

6.Microstructural Evolution and Mechanical Properties of Laser-remelted18Ni(200) Maraging Steel During Rapid Solidification and Heat Treatment

ZHONG Haoyu1, YANG Jiawei1, REN Huayong1, XU Quan2, LI Xiaolin1, WANG Zhijun1

[Abstract]    [View Full-Text]

7.Fluidity Improvement of Ti2AlNb-based Alloys with Enhanced TensileStrength and Oxidation Resistance through Composition Optimization

WU Yunjie1, ZHANG Pengfei1,2, SUN Feng3, ZHOU Yu3, YANG Haoxue1, WANG Jun1,3

[Abstract]    [View Full-Text]

8.Research on the Microstructure and Deformation Mechanism of TC4Titanium Alloy Welded Joints Based on In Situ Observations

SHAO Jiajun1, JIA Runchen1, LI Qian2, ZHANG Siyuan2, XIN Shewei2, ZENG Weidong1

[Abstract]    [View Full-Text]

9.Novel Al-Mg-Si-Cu-Mn Alloy Design Based on Phase Diagram Calculations

GAO Chenqi, TIAN Lusha, LI Jianping

[Abstract]    [View Full-Text]

10.Effect of Alloying on the Grinding Performance of Al-18 wt.% Si Alloy

TANG Ziyang, LUO Xi, LIAO Rui, LI Xiaosong

[Abstract]    [View Full-Text]

11.Effect of the Preparation Process on the Structure andProperties of the STTO/PVDF Composites

NI Lei1, MA Yingying1, CHANG Rong1, MENG Ruixi1, LIN Yuxin1, ZHONG Hong2

[Abstract]    [View Full-Text]

12.Forming Quality and Mechanical Properties of Rare Earth ModifiedAl-Mg Alloy Produced by Laser Powder Bed Fusion

DU Lei, XIAO Meili, FU Yanfei, KE Linda, XU Ganghao

[Abstract]    [View Full-Text]