当前位置：首页 > 过刊浏览->2021年42卷第1期
烧结陶粒砂在树脂砂中的应用效果
Application Effect of Sintered Ceramsite Sand in Resin-bonded Sand
浏览(3577) 下载(12)
- DOI:
- 作者:
- 钟飞升 1，2 ，张雅丹 1，2 ，常 成 1，2 ，张希兴 1，2 ，李家波 1，2 ，冀运东 3
ZHONG Feisheng1,2, ZHANG Yadan1,2, CHANG Cheng1,2, ZHANG Xixing1,2, LI Jiabo1,2, JI Yundong3
- 作者单位:
- 1.彰武县联信铸造硅砂有限公司，辽宁 阜新 123200；2.彰武联信金莹铸造材料有限公司，辽宁 阜新 123200；3.武汉理 工大学 材料科学与工程学院，湖北 武汉 430070
1. Zhangwu Lianxin Foundry Material Co., Ltd., Fuxin 123200, China; 2. School of Materials Science and Engineering, Fuxin 123200, China; 3. School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
- 关键词:
- 烧结陶粒砂；孔隙；强度低；冷芯盒工艺
sintered ceramsite sand; porosity; low strength; cold box process
- 摘要:
- 烧结陶粒砂是由耐火粉料、粘接剂、助熔剂等粉料，经过造粒、干燥、筛分、烧结制成。 具有耐火度高，球形度
高等优点。主要应用于覆膜砂，其他应用较少。结果表明，通过烧结陶粒砂实际应用于三乙胺冷芯盒工艺制芯发现，烧结
陶粒砂表面有孔洞，造成冷芯盒强度低。 烧结陶粒砂在覆膜砂中应用，具有强度高，膨胀率低的优势。
Sintered ceramsite sand is obtained by granulation, drying, sieving and sintering of refractory powder, binder, flux and other powder materials. The utility model has the advantages of high refractory degree, high spherical degree and the like. At present, it is mainly used in resin coated sand technology, but less in other resin coated sand technology. In this paper, it is found that there are holes in the surface of sintered ceramsite sand in the triethylamine cold box process, sintered ceramsite sand has the advantages of high strength and low expansion rate when used in coated sand.