当前位置：首页 > 过刊浏览->2021年42卷第1期
聚酚氧树脂/酚醛树脂混合物用于 制备覆膜砂的研究
Study on Preparation of Coated Sand with Polyphenol-oxygen Resin/Phenol Formaldehyde Resin
浏览(3683) 下载(17)
- DOI:
- 作者:
- 钟飞升 张雅丹 常成 张希兴 李家波 冀运东
ZHONG Feisheng1 , ZHANG Yadan1 , CHANG Cheng1 , ZHANG Xixing1 , LI Jiabo1 , JI Yundong2
- 作者单位:
- 1. 彰武县联信铸造硅砂有限公司，辽宁 彰武 123200；2. 武汉理工大学 材料科学与工程学院，湖北 武汉 430070
1. Zhangwu Lianxin Foundry Material Co., Ltd., Zhangwu 123200, China; 2. School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
- 关键词:
- 聚苯氧树脂 覆膜砂 溃散性 共混
ZHONG Feisheng1 , ZHANG Yadan1 , CHANG Cheng1 , ZHANG Xixing1 , LI Jiabo1 , JI Yundong2
- 摘要:
- 聚酚氧树脂具备高韧性高软化点的特点，其与热塑性酚醛树脂共混可以显著提高酚醛树脂的韧性，提高常
温强度和热强度，并改善覆膜砂溃散性。 将聚酚氧树脂与酚醛树脂共混制备覆膜砂，实验结果表明，聚苯氧树脂添加
10%时，覆膜砂拉伸强度提高 15.2%，弯曲强度提高 12.8%，熔点提高 3 ℃，溃散率提高提高 20%，在铝合金铸件上面具
有较好的应用前景。
Polyphenolic-oxygen resin had the characteristics of high toughness and high softening point. Its blending with thermoplastic phenolic resin can significantly improve the toughness of phenolic resin, enhance the strength and thermal strength at room temperature, and improve the collapsibility of coated sand. The results show that when the resin is mixed with phenolic resin to prepare the coated sand, the tensile strength, bending strength, melting point and breaking rate of the coated sand are increased by 15.2%, 12.8%, 3 ℃ and 20%, respectively, When 10% polyphenoxy resin is added into the resin. which show a good application prospect in aluminum alloy castings